DMMS 350 - Low Cost Multifunction Power Meter
with Built-in Ethernet LAN Connectivity

December 28, 2001

Publicity Release

Westbury, New York - Electro Industries/GaugeTech (EIG) announced today the introduction of the DMMS 350, a low cost, 3 phase multifunction power meter with built in Ethernet LAN connectivity.

The DMMS 350 is an advanced Multifunction Power Meter that provides complete access to all voltage, current, and power values through an easy to use display and via an existing TCP/IP Ethernet LAN. The meter can connect to any Ethernet network and reports its information using industry - standard Modbus TCP/IP protocol.

The DMMS 350 is ideal for applications requiring real time metering data streaming to data collection systems through a facility LAN or via the Internet, providing on-line connectivity easily, quickly and economically.

The DMMS 350 is a four-quadrant, multifunction power meter that includes multiple advanced measurement features to support power analysis, control and power quality.

Electro Industries, a strategic partner of General Electric, is the leader in web accessed power monitoring. For more than 25 years, EIG set the industry standard for advanced power quality and reporting, revenue metering, and substation data acquisition and control.

DMMS 350

Nexus 1250 Hi-Performance Power Monitor
Obtains Measurement Canada Approval

July 27, 2001

Publicity Release

Westbury, New York - Electro Industries' high-performance Nexus 1250 power monitor has been approved by Measurement Canada for revenue metering applications. EIG's Nexus monitor combines 0.04% revenue accurate Watt-Hour readings, high-performance power quality recording, advanced control functionality and direct Ethernet and Web Access. The Nexus 1250 meets the needs of the deregulated utility environment by providing the total picture of power usage and power quality at critical customers, substations, and power tie lines. With DNP 3.0 protocol and MV90 compatibility the Nexus integrates directly into any SCADA system and utility billing software.

Nexus 1250 High-Performance Power Monitor
Gains Ethernet TCP/IP Capabilities

February 5, 2001

Publicity Release

Westbury, New York - Electro Industries, the world leader in power monitoring products, announces direct Ethernet and Web functionality for its Nexus 1250 power monitor. This advanced communication allows the following functionality.

Direct Modbus over TCP/IP – Allows the Nexus to communicate via open protocol over Ethernet. Use any 3rd party software or Nexus Communicator to speak over a LAN or Internet.

12 Simultaneous Sockets – This unit acts a web server allowing multiple connections simultaneously. This allows up to 12 users to be accessing data from the card simultaneously. Bring data to SCADA, have data brought to remote HMIs, allowing auto-downloads, and communicate via MV90. All of this is available simultaneously.

Modbus Gateway Functionality – The unit allows multiple devices to gateway to a LAN using this serial connection. This allows up to 16 additional devices up to the LAN. It gateways via port 2.

Flash Upgrade Functionality – The card provides Flash up grade functions so that the internal firmware can be field updated to provide new features and functions as they become available.

Direct MV90 Revenue Data Reading Support – Since this meter uses MV90 with Modbus protocol, it directly interfaces to MV90 via Ethernet connectivity.

Nexus 1250