Electro Industries, the leader in power monitoring and smart grid solutions is looking for an experienced Field Application Engineer to join our Engineering Support Team.

We take pride in the support we offer with our products and that support continually brings customers back to EIG. In this position you will work directly with customers providing technical assistance on the installation and operation of our products and software. We are currently offering positions in the vicinities of Richmond, VA area, San Francisco Bay area and Corporate headquarters in Westbury, Long Island.

• Provide technical assistance and support to company engineers and equipment end users in the quick and efficient startup of newly installed equipment. Also training of site personnel in the operation and maintenance and repair of the equipment
• Write technical reports, bulletins, FAQs, troubleshooting and programming guidelines and procedures
• Plan and modify products to meet customer needs
• Set up and debug the company’s SCADA system at client sites
• Develop action plans for open support cases and ensure customer satisfaction
• Be responsible for the commissioning of both power metering products as well as entire industrial systems

• Must have a Bachelor degree in Electrical Engineering or Electronic Engineering or related field of study
• Knowledge of SCADA programming is required
• This position requires approximately 20% to 50% of primarily domestic travel to client sites
• Must be available for travel on short notice; (Both Domestic and International travel are likely to be required)
• Must have valid driver’s license and clean driving record and the ability to obtain an U.S. passport

Electro Industries, the leader in power monitoring and smart grid solutions is looking for an experienced Field Application Engineer to join our Engineering Support Team.

We take pride in the support we offer with our products and that support continually brings customers back to EIG. In this position you will work directly with customers providing technical assistance on the installation and operation of our products and software.

• Provide technical assistance and support to company engineers and equipment end users in the quick and efficient startup of newly installed equipment.
• Responsible for the training of site personnel in the operation, maintenance and repair of the equipment.
• Write technical reports, bulletins, FAQs, troubleshooting and programming guidelines and procedures.
• Plan and modify products to meet customer needs.
• Set up and debug the company’s SCADA system at client sites.
• Develop action plans for open support cases and ensure customer satisfaction.
• Be responsible for the commissioning of both power metering products as well as entire industrial systems.
• Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

• B.S. in Electrical Engineering, Computer Science or equivalent degree, or equivalent work experience.
• 2+ years of experience in power systems, industry practices, and system protection, protective relays and their applications, settings, and testing.
• Demonstrated experience in software, integration and automation, industrial controls, PLCs, industry protocols (IEC-61850, DNP, Modbus), Ethernet systems, protocol analyzers, and industry SCADA practices.
• Strong technical training, excellent communication both written and verbal, and above expectation customer service skills.
• Strong programming skill in C, C++ and Java.
• Ability to direct daily work activities with limited supervision.
• Good understanding of industry standard communication protocols with an emphasis on Modbus, IEC 61850,DNP and BACnet.
• Knowledgeable in computer networking architectures, topologies, and hardware.
• Knowledgeable in computer programming languages (Visual Basic, C/C++, Java, etc.), databases (SQL), and HTML development.

Position requires approximately 20-50% domestic travel to client sites. Must be available to travel on short notice.
Must have a valid driver’s license and clean driving record.

Electro Industries, the leader in power monitoring and smart grid solutions, is looking for an Electronic Technician to troubleshoot electronic assemblies.

• Test, troubleshoot, and repair analog and digital electronic circuits, assemblies, products, parts and equipment down to component level using measuring and diagnostic tools such as oscilloscopes and multi-meters.
• Read electrical schematics and diagrams and technical documents.
• Ensures systems and components meet established specifications.
• Writes technical reports to describe and illustrate system malfunctions for consideration by engineers in affecting system design and procedures.
• Must be aware of the environment and observe all safety instructions
• Other tasks as assigned

• AAS degree or technical training or equivalent technical experience. Company training and certification upon hire

Electro Industries, the leader in power monitoring and smart grid solutions, is looking for a Hardware Design Engineer to join our Engineering team. This position is located at our Corporate office in Westbury, NY.

Responsible for the integrity of company data, which is entered by a number of CRM users.

• Create design requirements specifications from product features, illustrated with high and detailed level block diagrams.
• Requirements include electrical, mechanical, environmental and standards compliance details.
• Design Analog and Digital or mixed mode circuits with schematic capture and board layout software.
• Optimize design for manufacturing process.
• Make bills of materials and assembly drawings for production.
• Write production test specifications and procedures.
• Create circuit design verification and debug documentation.
• Test prototypes and provide performance analysis in written report.
• Research, test and verify substitutes for end of life parts.
• Perform any other electrical duties required by the Company.

• Bachelor of Electrical Engineering
• 5-10 years of experience in hardware engineering and design
• Knowledgeable in design system/hardware/
• Experienced with CAD design
• Excellent problem-solving skills
• Ability to source components and work with component vendor
• Excellent communication skills both written and verbal

Electro Industries, the leader in power monitoring and smart grid solutions, is looking for an Engineering Technician (R&D) to join our Engineering team. This position is located at our Corporate office in Westbury, NY.

In this position you will have the opportunity to work with our Chief Innovation Officer, an engineer with dozens of patents in our industry. You will be responsible for developing and testing solutions to solve technical problems in research and development. Assists engineers, inspects products, conducts tests and collects data.

• Perform EMC type testing as per industry standards.
• Understand and modify Electrical schematics, diagrams and technical documents.
• Assist Design engineers in verifying product performance and writing of reports to describe the verification.
• Create and build test fixtures.
• Wiring up of panel instrumentation.
• Test, troubleshoot and repair analog and digital circuitry down to component level.
• Create and perform test cases as per product feature requirements.
• Maintain lab equipment.
• Power supply experience a plus.

• AAS degree, degree in Electronics Technology or equivalent technical experience
• Experience with Computer software such as MS Word, Excel and adobe pdf
• Experience with Soldering and Wiring
• Experience with multimeters and oscilloscopes
• Network experience a plus
• Mechanical aptitude a plus

Electro Industries, the leader in power monitoring and smart grid solutions, is looking for a Compliance Engineer. In this position, you will create procedures and guidelines to ensure that governmental and industry regulations are met for our products.

• Manage compliance issues for commercialized products and under development
• Responsible to drive product safety compliance and certifications
• Responsible to submit, maintain and update regulatory paperwork as needed to insure all product standard are tested and current.
• Responsible to test, debug and/or collaborate with design engineers to improve product to pass requirements
• Research, develop and serve on committees to insure that products will be future developed standards
• Prepare compliance plans and reports or any other task that is required by the company
• Research and test product hardware to keep product deliveries flowing and within standards compliance
• Update designs and improve electronics to manage supply chain and reduce costs

• Bachelors in Electrical Engineering or Engineering Technology plus 3 years’ experience in Compliance.
• Knowledgeable of EMC compliance testing
• Familiar with UL, CE, ANSI and IEC type specifications
• Experienced with product certification process
• Experience in energy metering and cyber-security a plus

Electro Industries, the leader in power monitoring and smart grid solutions, is looking for an Embedded Software Engineer to join our talented Engineering team. This position is located at Mumbai, India.

• Develop embedded programs and firmware
• Support existing firmware, fix bugs and add new features.
• Interface with hardware design and development, and review code design.
• Support customer service with firmware issues.
• Create and maintain internal firmware documentation.
• Review and support software manuals created by technical writers.

• Bachelor of Electrical/Electronics/Computer Engineering or related field.
• Master Degree a strong plus including computer architecture, program languages, Digital systems, electronic/digital circuit prototyping and other relevant courses.
• 5-10+ years of experience in embedded systems and firmware design architecture.
• Must have skills in C programming, RTOS, Interfaces, hardware and tool development for compiling and debugging.
• Excellent problem-solving skills
• Excellent communication skills both written and verbal